DnD Basic 1inch Square Wall Tiles for D&D
DnD Basic 1inch Square Wall Tiles for D&D
Published 2023-01-16T16:12:06+00:00
Included is 9 of the following 1x1, 1x2, and 2x2 tiles. Amongst them are 1x1 and 2x2 corner tiles and slanted (diagonal) wall tiles. These are perfectly fit for my previous floor tiles; theres a link to those below.
https://www.myminifactory.com/object/3d-print-dnd-basic-1inch-square-floor-tiles-for-d-d-222915
There are holes for each inch on the side and bottom for magnets. They fit a 3mmx1mm sized magnet pretty snug, and I easily get them on with a drop of super glue, I find hot glue doesnt hold well.
I made simple tiles for my home dungeons and dragons game and thought others could utilize from this. My goal is to make a easy to use and simple to store; non clunky tile system that gives you the option to use magnets.
I use an Adventure 3 Pro and have had zero problems other than a little bit of stringing towards the top. For a 2x2 it takes almost two hours each.
Date published | 16/01/2023 |