Mystic-Realm's QDS - Quick Dungeon System Series 1
$55.00 Mystic-Realm's QDS - Quick Dungeon System Series 1
Published 2023-01-24T06:14:02+00:00
QDS - Quick Dungeon System Series 1
Brick & Mortar Dungeon! This terrain can be played off any direction, is even double sided and can even be stacked! Non-traditional walls as the edge of the tile is the wall, unless you set anohter tile next to it. Very easy to use and most chambers tiles can be played as an encounter. Set each tile down one at a time fog of war style or build the entire dungeon before the adventuers show up.
† Includes †
- 7.5″ Chambers
- 6.5″ Chambers
- 5.5″ Chambers
- 4.5″ Chambers
- 3.5″ Chambers
- Corridors
- Grates
- 6″ Pools
- Prison Cells
- Stairs
- Doors
- Accessories
We also have a Cave version - QCS so be sure to check that out.
We have did our share of testing with FDM printers and over the years it’s been a push pull of settings. We wanted a strong piece that was efficient and cost effective. For strength most of us target a higher infill. What we found is at 20% infill it seems to give the print strength, but! Even at 20% when it comes to little pokey things on the piece the infill might not line up with small protruding things like mushrooms, bulbous fungi, branch, roots and vines etc. Many times they can be hollow and break off on impact.
After much testing found with a thick exterior shell the protruding things are much more resilient to impact. This also means with the thick shell we can lower the infill and lower we did! We took it to 5%. The prints feel hollow and light weight but those tiny extremities are stronger.
Here is our current FDM printer settings.
- .10 layer height
- .9 top shell thickness
- .7 bottom shell thickness
- 5% infill
Date published | 24/01/2023 |
Price | $55.00 |
Support Free | YES |