Skip to content

BYOB Parametric Bearing

Bearings.jpg BYOB Parametric Bearing
SectionAnalysis.png BYOB Parametric Bearing
MoreSpin_OuterRace_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
MoreSpin_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
LessPlay_OuterRace_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
MoreSpin_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
LessPlay_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
LessPlay_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.png BYOB Parametric Bearing
LessPlay_OuterRace_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
LessPlay_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
LessPlay_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
MoreSpin_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
MoreSpin_OuterRace_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
MoreSpin_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.stl BYOB Parametric Bearing
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.1k views
  • 3 likes
  • 87 downloads
License
3D design format
Folder details Close
  • LessPlay_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.stl
  • LessPlay_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.stl
  • LessPlay_OuterRace_10mmID_30mmOD_10mmThick_V1.stl
  • MoreSpin_InnerRaceBottom_10mmID_30mmOD_10mmThick_V1.stl
  • MoreSpin_InnerRaceTop_10mmID_30mmOD_10mmThick_V1.stl
  • MoreSpin_OuterRace_10mmID_30mmOD_10mmThick_V1.stl
  • ParametricBearingPressFit.f3d

Learn more about the formats
Publication date 2023-01-31 at 15:34
?
Published to Thingiverse on: 2020-11-02 at 08:23
Design number 1039650
mrclean71774

mrclean71774

3D printer file info

3D model description

Bring Your Own Balls Parametric Bearing. I used 6mm soft air ammo for the bearings in the stl files but I have include the parametric Fusion 360 file so you can use whatever balls you have.

There are two versions of a 10mm I.D, 30mm O.D, 10mm thick bearing. The more spin version has more play between the balls and the races and spins for about three seconds when spun by hand. The less play version only spins for about a second but the inner race doesn't move around as much.

Both are made of three parts, an outer race, and a two part inner race that press fits together. The inner race parts could be glued together if needed but I haven't found it necessary.

EDIT: After dropping one and it popping apart I would recommend carefully gluing the inner race together. Try not to glue your balls together!

To assemble put the bottom inner race on a flat surface with the outer race around it. Lift up the outer race a bit to provide clearance for the balls. Once the balls are in position lower the outer race and put the inner race top on top of the bottom and push together. The included bearings take ten balls each.

3D printing settings

-

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.