Arknights - SilverAsh [Coral Coast - Seeker SKm01] Sword

This model is designed for Coral Coast SilverAsh cosplay from Arknights.

It comes in 2 main parts, the sword, and the sheath. The sword and sheath are cut into 7 pieces and 5 pieces respectively to fit in a printer with a platform size of 200mm x 200mm x 200mm.

There is a picture with pieces labeled to their file name in the preview section which you can refer to.

I also include the uncut version for both sword and sheath just in case you want to cut it your self.

Pieces 4 to 5 are pieces to form the blade. You can skip printing these pieces if you only need this as a prop to attach to your waist or you have your own way to craft the blade. You can proceed to print pieces S1 to S5 which are the pieces to form the sheath.

You will need to wrap some cloth at the tip of the sheath to replicate the design in the artwork.

The sheath is in a shell form with a 4mm wall. You can choose to make both the sheath and the sword if you need a complete prop. I will suggest scaling the sheath up by a few percent so it can have more space to insert the blade or else there will be a lot of work during the post-printing process.

For scaling, please use the same scale for all the pieces. If you need to have more room for the sheath, please make sure to use a scale bigger than the sword.

Cheers and Happy Printing!

Dimension: 1037.28mm x 256.57mm x 92mm