Skip to content

FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)

2023-02-01-19.56.16.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
2023-05-13-13.58.42.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Lower.png FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Upper.png FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Driveshaft_Adapt.png FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
2023-01-30-10.56.13.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
2023-02-01-19.44.17.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
2023-02-01-14.35.23.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
2023-02-01-19.58.27.jpg FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Hooker_Designs_FCX24_Rear_Lower_+20mm.stl FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Hooker_Designs_FCX24_Driveshaft_Adapter_+20mm.stl FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Hooker_Designs_FCX24_Rear_Upper_+20mm-v2.stl FMS FCX24 +20mm Rear Trailing Arm Set (Lower, Upper, Driveshaft Adapter)
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 4.5/5 (2 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 4.7k views
  • 5 likes
  • 28 downloads
  • 1 collection
License
3D design format
STL Folder details Close
  • Hooker_Designs_FCX24_Driveshaft_Adapter_+20mm.stl
  • Hooker_Designs_FCX24_Rear_Lower_+20mm.stl
  • Hooker_Designs_FCX24_Rear_Upper_+20mm-v2.stl

Learn more about the formats
Last update 2023-12-20 at 00:42
Publication date 2023-02-18 at 00:32
Design number 1071635
HookerDesigns

HookerDesigns

3D printer file info

3D model description

This will allow you to stretch your FMS FCX24 Dodge Power Wagon an additional 20mm in the rear while upgrading to a trailing arm style suspension.

Includes lower trailing arm, upper link, and driveshaft adapter.

Upper link reuses stock ball and hardware. If you have any trouble getting the pivot ball in try heating the link for a seconds and then inserting and allowing to cool in place (a few seconds with a lighter is all that is needed).

Lower link requires (4) M2x6/8mm screws for installation. You must leave the lower link hardware loose enough to allow full articulation; obviously don't tighten hardware down all the way or you'll experience binding,

I've had excellent luck with extending the stock driveshaft using the included design; however if you prefer to buy new metal driveshaft you can use "Axial SCX24 Steel RC Center Drive Shafts 40-52mm & 57-83mm" by Injora.

Check out this collection for other FCX24 designs:
https://cults3d.com/en/design-collections/HookerDesigns/fms-fcx24-power-wagon

THIS MODEL IS LICENSED TO YOU FOR PERSONAL USE ONLY. YOU ARE NOT PERMITTED TO SELL PRINTS BASED ON THIS MODEL.

3D printing settings

-100% infill
-0.1 to 0.15mm layer height for best results
-No supports are required

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.