Towel Holder | Towel holder

Hi everyone,

I needed a hook that holds the towel, even if the sling is torn.

So I created a simple one (based on some out of metal, that I have seen on the internet).

It holds the Towel really strong and it works with all kinds of towels. They let remove easily (pull it up slightly).

You can stick the holder on the wall with double-sided adhesive tape, or screw it with three screws.

There are 6 different versions:

• Hook: low material

• Hook_Logo: low material; with Logo

• Hook_screwable: low material; 3 screwholes

• Hook_sturdy: closed version with walls on both sides; easy to print

• Hook_Logo_sturdy: closed version with walls on both sides; easy to print; with Logo

• Hook_screwable: closed version with walls on both sides; easy to print, 3 screwholes

German

Servus,

as I needed a towel hook that would hold towels despite the loop being torn off, I quickly made one.

It holds the towels securely and they can be pulled out again just as easily.

It can be attached to the wall with double-sided adhesive tape (preferred) or with 3 screws.

There are 6 different versions in the folder:

• Hook: little material

• Hook_Logo: little material; with logo

• Hook_screwable: little material; 3 screw holes

• Hook_sturdy: closed version; easier to print

• Hook_Logo_sturdy: closed version; easier to print; with logo

• Hook_screwable: closed version; easier to print, 3 screw holes