5-3-2024
(cults3d note, at the moment Iβm working on a lot of improvements so keep a eye on the discord and printbels for some bata parts. After that is closed the cults3d version will be fully updated)
to day I discovered that I made a error with the nozzle spring placement. so even do the spring guide helps. do I recommend to reprint the bolt front! to prevent nozzle spring damage
also I have added support for the WE / AW G18 nozzle
the TM model is still a work in progress
Β
ββββββββββββββββ
ID 13,70mm pistonβ β options
ββββββββββββββββ
supported nozzles for bolt front model: KJW PK13 17Β
KJW KP13 , KJW KP13c,β β KJW KP17,Β
supported nozzles for bolt front model: G17 WE AWΒ
WE G17, WE, G19, WE G27, WE G34,Β
AW VX01, AW VX0100, AW VX0101, AW VX0111, AW VX7, AW VX9,Β
G-force 17, G-force 19,Β
supported nozzles for bolt front model: G18 WE AWΒ
WE G18c, WE G23, WE G26,Β
AW VX02, AW, AW VX0200, AW VX0201, VX0210, AW VX0211, AW VX8,β βΒ
G-force 18c,Β
ββββββββββββββββ
ID 13.40mm piston optionsβ β .Β
ββββββββββββββββ
supported nozzles for bolt front model: TM G17
TM G17, TM G19, TM G22, TM G26. TM G34, (gen 3βs)βΒ
16-12-2023
bolt fronts with spring guide have been added
https://youtu.be/Z7I6xw9x5wM
13-12-2023
the H lower to H upper disconnect have been updated I made a error that is now fixed
11-12-2023 Lockpin / project streamlining update
the lowers
have been switched for the H model lower.
These can be used for FA, BL and H models.
In case for old H uses: itβs not necessary to reprint the lower. But for new builds itβs recommended to use the new parts of course
the uppers
the uppers have been updated to the H model upper that will work for BL and SF models as well
and a UNW hopup cut out have been applied.
In case for old H uses: itβs very easy to mod it for the new hopup system, so no need to reprint things.
Bolts
the bolts are now lock pin ready, besides that there are no big updates made on them.
Also Keep in mind that a SF bolt can also work as a semi auto bolt for a H build in case you want to have more flexibility. In regards to semi auto and full auto fire options later on
https://www.printables.com/model/676226-fgc-6sf-parts-set-for-fgc-6h-and-fgc-6bl-parts-set
Bolt fronts
they have been updated to work with the new UNW hop up unit (beta)
https://www.printables.com/model/670322-fgc-6-unw-hop-up-unit-beta-version
5-10-2023
PDF's updated
-
update: 27-9-2023
spring caps updated, no need to reprint, it just saves on supports
-
Update: 10-3-2023
anarchy lowers have been added
- V25 bolts have been added (manual shows how to update a v24 bolt to a v25 bolt)
- improved disconnects have been added
-
Update: 1-9-2023
manual updates
this is the 2023 re-release of the FGC-6FA with updated parts, and manuals and better testing data. so it should be a lot easier to build this model. this model can fire on full auto or semi auto depending on the sear group that you will be using. and is simple to switch out. but to be fair this model is more made to be full auto. unless you like to have the experience of having a open bolt semi auto. but the FGC-6 H and BL are nicer to shoot on semi auto.
this kit comes with a lot of options! so read the PDFβs well before you start so you know what to select to print and buy.
this project have been tested with green gas, red gas and HPA and it got a working range with the current springs of 90 up to 140 Psi on HPA.
look for shrouds and stock in the FGC-6BFA MKI or MKI collections
FGC-6FA MKII links
https://www.printables.com/social/180009-untangleworks/collections/88896
FGC-6FA MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/88906
the advanced parts will be released in a separate package. note: only use them as fine tuning and experiment parts! your FGC-6FA should work with the parts provided in this starter kit.
movie link:
original release video
https://youtu.be/miN9gHV7Fts
FGC-6 maple leaf hopup unit assembly we tech, TM, marui, VFC, gbb airsoft glock series
https://youtu.be/Lk3ifY9NuhU
FGC-6 H FA: why and how to use the upper sand tool
https://youtu.be/-QtMWLSduyY
hop up assembly
https://youtu.be/Lk3ifY9NuhU