Soap rack (parametric)

Fusion 360 parametric soap rack.

Assembled by gluing. 

Slicer files provided for 2x5 rows, 62x36mm cells, 100mm depth rack.

Customize model by changing user parameters in Fusion 360 project.  

As long as only favorite parameters are changed, model should update correctly.
Feel free to play with other parameters also, most of them should be safe.

Min. size - 2x2, max. - 6x6.

Limits can be changed by changing parameters MinRowsColumns/MaxRowsColumns.

Will throw errors if rows or columns set to 1, if set to large number it will take some time for model to update.

Assembly

1. Place front panel on flat surface

2. Glue in middle rows (top and bottom will be used later)

3. Glue on other front panel

4. Glue on side panels

5. Glue on bottom

6. Glue on top

Finished rack