CASTLE BIRDHOUSE - 100% SUPPORT FREE

NOTE: COPYRIGHT PA1© - PERSONNAL USE ONLY. SUBSCRIBE TO MY PATREON TO GET ALL MY FILES FOR FREE, PLUS EXCLUSIVE MODELS AND A COMMERCIAL LICENSE TO SELL YOUR PRINTS. LINK TO PATREON :

https://www.patreon.com/PA1_MAKER

Another birdhouse to my collection! Back to medieval times, here's the castle birdhouse!

Let's start by saying this: its a "big print" compare to my other ones! Be aware, almost half a kg will go in this project in total.

-Everything prints fine without supports. «no supports needed.
-All parts are already placed in the right orientation
-You will need some good overhang settings and some bridges are
present but nothing really intense. Everything is pretty easy to
print.

NOTE 1: Because of the layers orientation, some screw holes may crack. (the one on the vertical surfaces where the tower and the body merge together). It doesnt really matter if you follow this tip: I strongly suggest to glue those parts too. Use the screws as "alignement guides) and add some glue along the edges where the tower meets the body. This will give you a strong, rigid assembly. Do not glue any other parts installed with screws, especially the cleaning door and the support!!!

NOTE 2: The windows and the door are made with a color change. I have included three pictures as examples (two for the windows, one for the door) for the color changes.

NOTE 3: On parts where you have receiveing screw holes (balcony, tower, castle body), use at least 3 walls (shells).

Finally, between the roofs and the castle body, you will find a thin plate covering the whole castle body. This is to prevent any water from leaking inside. As an addition, both roofs have sloped to prevent water from staying on the roof, with gutters on each side to evacuate rain water.

Also, small holes at the bottom are now present in my designs, to prevent drowning of the baby birds if any water would get inside.

If you have any other questions, just ask! I will try to help you as much as i can!

Have fun!