Bugs Bunny, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series.

This is a onepiece version of Bugs based on my multi-part Bugs model that I've previously posted.

Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.

I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows:

Decrease scale to approximately 48% of the original scale.
X-Axis = 1.65 Inch, Y-Axis = 1.52 Inch, Z-Axis = 2.50 Inch
Printer: Anycubic Photon M3
Resin: Anycubic Water-Washable Grey
Exposure time: 2.8 seconds
Print time: 5-hours

Note: Something important to call out regarding print time. Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.

Other notes regarding the supplied STL file:

For FDM amd SLA printing, size the STL file as needed for your purpose and add Slicer supports.

Enjoy!