Toadstool Wall Shelf and Corner Shelves Cottagecore Fungi Mushroom Decor

This pair of toadstool shelves will brighten any space with Cottagecore vibes! It includes a flat-edge mushroom shelf and a corner shelf. They come in multiple pieces so you can color any way you wish with no painting required. Each shelf has two deeply embedded, bevel-edged nail holes for strong easy hanging.

There are 6 STL Files in the Zip folder, 3 for each type of shelf. Note that the files labeled WHOLE are for preview purposes on cults3D and are not meant for printing.

• Mushroom Corner Shelf - Top
• Mushroom Corner Shelf - Bottom
• Mushroom Corner Shelf - Dots
• Mushroom Wall Shelf - Top
• Mushroom Wall Shelf - Bottom
• Mushroom Wall Shelf - Dots

ASSEMBLY
Putting these shelves together is like doing a simple puzzle. Each mushroom dot has an obvious location that it fits in. They're also beveled so you can't accidentally place them upside down. The Top and Bottom pieces line up easily. All you need is a few dabs of glue and your decorative fungus is ready to hang.

COLORING
You do not need to paint these! the pieces are separate so you can simply print the bottom, top, and dots in whatever colors you want. We encourage you to be creative, and please share your makes for all to see!

DIMENSIONS
At full scale (100%) and fully assembled, the dimensions for each shelf are:

FLAT-EDGE TOADSTOOL WALL-SHELF SIZE
X = 19.6cm / 7.7in
Y = 9.9cm / 3.9in
Z = 16.5cm / 6.5in

TOADSTOOL CORNER-SHELF SZIE
X = 12.2cm / 4.8in
Y = 12.4cm / 4.9in
Z = 13.5cm / 5.3in

If you like the Mushroom Wall and Corner Shelves, please check out our ever-growing portfolio of STL models (including many more mushroom / Cottagecore items!)

• https://www.cults3d.com/en/users/GetPrinted3D/creations

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial License to legally sell our designs here:
- https://www.patreon.com/GetPrinted3D

The key to printing these is strong bed adhesion. The top of the Bottom lies flat on the bed, as does the bottom of the Top. If either one loses grip and warps on the edges, it will be noticeable when you glue them together. For this reason, you may choose to place a brim or raft for these pieces. It shouldn't be necessary, but you know your printer better than anyone. Use your best judgment here. If you think it needs a raft or a brim, use it.

Recommended Settings
Layer Quality Height: 0.2
Initial Layer Height: 0.3
Walls: 5 (for strong nail holes)
Infill: 25%
Speed: 80mm/s
Supports: No
Plate Adhesion: No (but use your best judgment)