Miss Fortune Broken Covenant League of Legends STL files

3D .STL model of Miss Fortune's weapon from the Broken Covenant skin, as seen in the League of legends game. This includes 4 .STL files for the total weapon. It is scaled to about 40cm.

The parts are suitable for a printer of at least 250mm high and 200mm wide, if your printer is smaller, you can cut the model out. The two pieces can then be glued together.

Files include:

.PDF files

.STL files

Recommended post-processing:

The parts can be glued together with super glue, I recommend pressing the parts 10 seconds together and letting them dry for a few minutes for strong connection. You can also use glue suitable for 3D printing or epoxy glue.

Sand your 3D prints with sandpaper, with the use of primer or spray filler to achieve a smooth surface. When you are happy with the results, your final coat should be a primer, before painting with acrylics. You can protect your work with varnish in satin or gloss.

The 3D models are made by me. These files are packaged in .RAR files, you need to extract the files properly to use them, if you have any problems doing that, please contact me.

License information:

You may not resell or distribute these files in any way. Not allowed for commercial use. You may not sell 3D prints or casts created using these files, except for a limited (one-time) quantity such as commissions. Attribution must be given at least once when your project is made using these files: mention Darrkarra in your project description.

Warning:

This is a fanmade item, I am in no way an official reseller or license by the relevant intellectual property owners.

You can find me

On Instagram / Facebook @Darrkarra

On www.Darrkarra.com