Soul Eater Maka Scythe Prop Replica

Maka's scythe is an iconic anime weapon featured in the classic anime and manga Soul Eater, these are easy to print, easy to finish and paint 3d models to construct a replica prop of her scythe ! The models feature 3d details to give depth and make the paint job much easier. The model is intended to use a a .5 inch inner diameter section of pvc for the handle shaft (around 5 foot, you can make it however long you want though)

The blade itself measures in at around 28 inches long and has 2 split variations, one set which have abbreviated titles and are the blade split up into 8 separate pieces for printing horizontally on large format printers, and another set which is named "vert" which is the blade split up into just 4 parts and intended to be printed vertically for easier finishing. The models are pre split for large format 3d printers like the creality cr10, you may need to slice the models further on your own to get them to fit on smaller machines

Both versions of the blade have 5 slots for the inclusion of sections of 4mm carbon fiber rods of specific lengths, these rods are not 100% required but will greatly increase the durability/rigidity of not only the part to part connections but also the blade sections themselves.

Rod Lengths- (4mm CARBON FIBER)
1x 9in long rod
1x 14in long rod
3x 12in long rods

Pick the version of models you want to print, slice them further if you need to, print with desired settings.