Biting piranha

Articulated, biting piranha with articulated fins.

Who has not ever wanted to have piranhas in an aquarium? These don't need an aquarium but they bite like crazy.

The body and fins are printed in place. When opening the fins for the first time you have to be careful and do it delicately, shelf by shelf, because they have a certain travel and if you force them, the little stops jump out.

3 pieces, plus the eyes.

Includes a base.

Very easy to print!!!

Uses PLA. The bite varies depending on the filament, the stiffer the material, the harder it bites but it breaks sooner, the idea is to find the balance to get the most out of the figure. Using quality PLA, the results are amazing.

Print at 100% scale so that the mechanisms print correctly.

Designed to be easy to print and durable.

Before joining the parts together, it is necessary to check that the mechanisms work properly.

Includes a one-piece version.

Easier assembly, the eyes act as a joint, you need to use a little glue.

Glass eyes are optional and you would need them 12mm in diameter.

BEWARE, with some strands it hurts your finger.

I'd really like to see your impressions!

WARNING! If you usually have adhesion problems, you should fix it before printing the body.

Use quality filament in good condition.

Very easy to print.

100% scale so that the mechanisms print correctly.

3 pieces. Very easy to assemble, the eyes act as a joint for the whole figure.

The first layer should come out perfect.

Without supports.

No edges.

Nozzle 0.4

Layer 0.2

Wall 1.2 or more

Backfill 20%

The figure must be robust.

For any problems feel free to let me know.