MULAN DRAGON MUSHU - 3MF - NO SOPPORTS - PRIN - IN PLECE

This FLEXIBLE MUSHU DRAGON FROM THE MOVIE MULAN is an articulated model that needs NO supports, NO assembly, and prints very well with PLA.

You will find 2 files 3MF Multicolor bamboo lab generic you can print it in 4 colors or in 6 colors eliminating the last 2 colors the Dragon will look spectacular.

You will find 3 different size models:

1 standard size .

2 medium sizes, you will find in this model 5 pieces to assemble by joining the pins of the spheres ( in a straight way make strong pressure on the union) I recommend using a drop of glue on the whiskers when marrying them.

3 large models, you will find 3 stl of this model separately, head, hip, and tail, it is amazing you can print it in a bigger size than the others, this will be assembled by joining the pins of the spheres (I recommend to make a strong pressure in a straight way over the joint.

I will leave a full body mushu OBJ file.

This Flexi is really fun to play with because it floats and moves in any shape,

As with all my flexibles, I went through several iterations to make sure it was strong, and easy to print without supports.

Feel free to share pictures of your impressions on this page, I'd love to see them.

If you like my flexible mulan mushu dragon, check out my other models you will love.

For all users who have an active subscription to me https://www.patreon.com/studiosDB92 you will find a letter of authorized by STUDIOS DIGITAL BROTHESR to be able to sell all models already 3D printed.

ALL STUDIOS DIGITAL BROTHESR designs are protected by Intellectual Property Law My digital files can NEVER be resold or shared in any way.

Subscriptions stl promo models at: https://www.patreon.com/studiosDB92

Thank you

*Without brackets

*Print-in-place (without mounting)

*10 to 20 % filler to be sure.

*I suggest 3 walls to make the peaks stronger.

*PLA works very well

*Make sure you have good adhesion on the bed if you are going to print small size use a balsa.