Star Lord's Earpiece
Star Lord's Earpiece
Published 2015-04-23T01:37:49+00:00
Star Lord's Earpiece from Guardians of the Galaxy. I originally found this on the RPF here - http://www.therpf.com/f78/star-lord-w-lights-sound-hair-blaster-progress-221724/ - from user Ein. I took his design and modified it to be more robust for printing. Pretty simple design, it is great if you want to make Star Lord's earpiece, the one his mask comes from. He only uses the right ear for the mask so no need for a left ear one. This is designed to fit my ear (which is average sized, I think). The design allows for two batteries, an LED, and a switch to be added to the earpiece. The photos do not include these parts. The light would go in the hole on the outside. Hope you like it.
Print at 0.2 mm layer height, with 10% infill. This uses 4 g of filament and takes 1 hour and 1 minute.
Date published | 23/04/2015 |
Time to do | 61 - 71 minutes |
Material Quantity | 4 g |
Dimensions | 53 mm x 71 mm x 6 mm |
Complexity | Very Easy |