League of Legends Ward
League of Legends Ward
3D
Published 2016-09-23T12:10:09+00:00
This is a design of the old school League of Legends ward. It comes in multiple pieces, so printing different sections in different color filaments, or painting different colors is easier.
The print in the photo was made on my Wanhao Duplicator i3 with Hatchbox Glow in the Dark-Blue PLA, then painted. The pieces will stay in place without glue while stationary, but it would be recommended to use glue if you plan on handling it regularly.
I used spray paint to paint my ward, a coat of primer underneath, then 2 layers of paint with a hour to dry between. While it may not be quite as elegant as printing in the three colors, it will work if you do not happen to have the original colors on hand.
This model does require printing the wing file twice, because there is only one in the file.
| Date published | 23/09/2016 |
| Time to do | - 120 minutes |
| Material Quantity | 30g |
| Dimensions | 80mm x 80mm x 80mm |
| Technology | FDM |