Modular Mech Helbrute Set
Modular Mech Helbrute Set
Published 2018-05-24T16:37:57+00:00
Expansion to my modular mech system https://www.myminifactory.com/object/3d-print-64464 (I have several other expansions too!) inspired by the Helbrute of Warhammer 40k! All sample pictures shown above were done using the split files and using no support at all (except on the "open claw" files, those will require supports).
In order for any of the older Torsos to accept the new arms and the tentacles you must print the Shoulder Joint. The 2 Legged Groin is the standard groin used for my other mech systems as well and will accept any of the previously made legs.
The Helbrute Torso accepts all normal arms from my previous Modular Mech systems, but you will most likely need to print the "Arm Extension" to keep it from running into the bulky parts of this mech (and it allows the old arms to have a new shoulder joint so that they can be posed in new exciting ways!).
Feel free to suggest new parts, new sets, etc. but make sure to check out my other sets already out there!
Date published | 24/05/2018 |
Technology | FDM |
Complexity | Easy |