Sharky

Summary Fpv racer entièrement imprimer 3D de 120mm en 3pouce 3S prévus pour vol indoor Voici la config Camera 600tvl cmoshttp://www.banggood.com/fr/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html?rmmds=search FC furious fpv piko blxhttp://furiousfpv.com/product_info.php?products_id=41 Ou tout autre FC en 20x20http://www.banggood.com/fr/Betaflight-3_1-F3-6DOF-Mini-Flight-Controller-20x20mm-Integrated-OSD-Built-in-5V-BEC-p-1119503.html?rmmds=category VTX imersion RC tramp (ou plus petit)http://www.immersionrc.com/fpv-products/tramp-hv-5-8ghz-video-transmitter/ Récepteur taille max XSRhttp://www.banggood.com/FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.html?rmmds=search Ou plus petit pour gagné en place dans le montage comme le LR1000 de Furious Fpvhttp://furiousfpv.com/product_info.php?cPath=29&products_id=159 ESC max 24mmx20mm Moteur 1306 Lipos ESP 600mah 3Shttps://www.drone-fpv-racer.com/batterie-lipo-eps-3s-600mah-30c-860.html Ou tout lipos ne dépassant pas 22 mm x 26 mm x 46 mm Le modèle test a été imprimer en PLA et de par sa forme il est incroyablement résistant. Le mieux serait de l'imprimer en ABS ou ABS/kevlar ou ABS/Carbone pour être le plus léger possible. How I Designed This English version. Fpv racer fully print 120mm 3D in 3in 3S designed for indoor flight Here is the config Camera 600tvl cmoshttp://www.banggood.com/fr/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html?rmmds=search FC furious fpv piko blxHttp://furiousfpv.com/product_info.php?products_id=41 Or any other FC in 20x20http://www.banggood.com/fr/Betaflight-3_1-F3-6DOF-Mini-Flight-Controller-20x20mm-Integrated-OSD-Built-in-5V-BEC-p-1119503.html?rmmds=category VTX imersion RC tramp (or smaller)http://www.immersionrc.com/fpv-products/tramp-hv-5-8ghz-video-transmitter/ Receiver size max XSRhttp://www.banggood.com/FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.html? Rmmds = search Or smaller for gained up in mounting like the LR1000 from Furious Fpvhttp://furiousfpv.com/product_info.php?cPath=29&products_id=159 ESC max 24mmx20mm Engine 1306 Lipos ESP 600mah 3Shttps://www.drone-fpv-racer.com/batterie-lipo-eps-3s-600mah-30c-860.html Or lipos not exceeding 22 mm x 26 mm x 46 mm The test model was printed in PLA and by its form it is incredibly resistant. It is best to print it in ABS or ABS / kevlar or ABS / Carbon to be as light as possible.