Designed by
theamphioxus
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Gemini 11 titan 2
titan 2 launcher of the Gemini 11 mission. September 1966 scale to 1 / 60th. 73 pieces Removable in 9 elements
more information : https://the-amphioxus.monsite-...
print setting: tested on an i3 with a 0.4mm nozzle. Imperative first layer at 0.3mm layer height 0.2 mm for large pieces. 0.1 or 0.15 mm for small parts. No support needed. 15% filling if necessary. 0% on the thin walls. Thickness of edges for thin pieces at 0.4mm (one nozzle passage) edge thickness for other parts at 0.8 or 1.2 mm Assembly: Bonding will make PVC glue in small amount (risk of deformation of parts if too much glue)
Design Files
File Size
33 silver x2.stl
684 Bytes
35 silver.stl
474 KB
39 white.stl
263 KB
02 silver x2.stl
738 KB
03 white x2.stl
119 KB
11 silver x2.stl
584 KB
04 silver x2.stl
966 KB
14 silver.stl
412 KB
09 white.stl
15.1 KB
06 silver x2.stl
741 KB
20 white x8.stl
684 Bytes
13 white.stl
203 KB
07 silver x2.stl
1.07 MB
10 white.stl
275 KB
26 silver.stl
1.07 MB
16 white.stl
286 KB
17 silver.stl
375 KB
19 silver.stl
677 KB
21 silver.stl
777 KB
23 black.stl
189 KB
24 silver.stl
764 KB
27 silver.stl
335 KB
29 white.stl
463 KB
30 silver.stl
525 KB
32 silver x4.stl
684 Bytes
34 silver x2.stl
5.36 KB
38 black.stl
5.36 KB
40 gold.stl
124 KB
42 yellow.stl
46.5 KB
45 yellow x4.stl
47.2 KB
47 black.stl
293 KB
01 red.stl
108 KB
43 silver x2.stl
46.5 KB
46 silver.stl
232 KB
48 white.stl
49.9 KB
05 silver x2.stl
763 KB
08 silver.stl
243 KB
12 silver x2.stl
451 KB
15 black.stl
134 KB
18 black x2.stl
29.2 KB
22 white x4.stl
12.8 KB
25 silver.stl
798 KB
28 silver.stl
473 KB
31 silver.stl
405 KB
36 black x4.stl
684 Bytes
37 yellow.stl
385 KB
41 silver x3.stl
5.94 KB
44 white.stl
224 KB
Comments