First I will indicate the CURA general print settings and then detail them for each piece
Top/Bottom Pattern: According to piece.
Infill Density: 20%.
Support Density: 15%.
IMPORTANT! See photos for the print position of each piece.
1xBody_A: Approx.Time: 13 h. Material: 147 gr.
Top/Bottom Pattern: Lines
Support: Yes
Support Over Hang Angle: 87th
Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
1xBody_B: Approx.Time: 7 h. Material: 86 gr.
Top/Bottom Pattern: Lines
Support: Yes
Support Over Hang Angle: 87th
Post Procesing / Pause at height (change colour): 20mm, 38mm, 56mm, 74mm, 92mm, 110mm.
Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver, Traffic Black and Traffic White.
1xBody_Front: Approx.Time: 4 h. Material: 42 gr.
Top/Bottom Pattern: Lines
Support: Yes
Support Over Hang Angle: 85Β°.
Recommended filament: Polyalchemy Elixir Rush Gold or Fillamentum Gold Happens.
1xAxle_Front_Left and 1xAxle_Front_Right: Approx.Time: 4 h. Material: 40 gr.
Top/Bottom Pattern: Lines
Support: NO
Post Procesing / Pause at height (change colour): 21.8mm, 24mm.
Recommended filament: Fillamentum Vertigo Grey and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
1xExhaust_Left and 1xExhaust_Right: Approx.Time: 1 h. Material: 8 gr.
Top/Bottom Pattern: Lines
Support: NO
Post Procesing / Pause at height (change colour): 16mm.
Recommended filament: Fillamentum Vertigo Grey and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
1xSpinner: Approx.Time: 38 min. Material: 6 gr.
Top/Bottom Pattern: Lines
Support: NO
Post Procesing / Pause at height (change colour): 7.8mm, 15.6mm, 23.4mm.
Recommended filament: Fillamentum Traffic Black and Polyalchemy Elixir Rush Gold or Fillamentum Gold Happens.
1xAxle_Rear: Approx.Time: 2 h.30 min. Material: 24 gr.
Top/Bottom Pattern: Lines
Support: YES
Support Over Hang Angle: 65Β°.
Recommended filament: Fillamentum Vertigo Grey.
1xCockpit_Seat / 1xCockpit_rear / 1xJoint_Body_A_B / 1xJoint_Axle_Front / 1xJoint_Rear_Rim_Half / 1xJoint_Spinner_Body_Front: Approx.Time: 3 h. Material: 26 gr.
Top/Bottom Pattern: Lines
Support: NO
Recommended filament: Fillamentum Vertigo Grey.
2xFront_Tire / 1xRear_Tire: Approx.Time: 5 h. Material: 48 gr.
Top/Bottom Pattern: Concentric
Support: NO
Recommended filament: Fillamentum Traffic Black.
2xFront_Tire_White_Stripe / 1xRear_Tire_White_Stripe: Approx.Time: 4 h. Material: 38 gr.
Top/Bottom Pattern: Concentric
Support: NO
Recommended filament: Fillamentum Traffic White.
2xFront_Rim: Approx.Time: 3 h.. Material: 30 gr.
Top/Bottom Pattern: Lines
Support: YES
Support Over Hang Angle: 85Β°.
Post Procesing / Pause at height (change colour): 19.6mm.
Recommended filament: Fillamentum Nobble Blue and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
2xRear_Rim_Half: Approx.Time: 2 h.. Material: 18 gr.
Top/Bottom Pattern: Lines
Support: NO
Post Procesing / Pause at height (change colour): 10.6mm.
Recommended filament: Fillamentum Nobble Blue and Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
2xHubcap: Approx.Time: 11 min. Material: 2 gr.
Top/Bottom Pattern: Concentric
Support: NO
Recommended filament: Polyalchemy Elixir Silver or Fillamentum Rapunzel Silver.
1xWindshield: Approx.Time: 11 min. Material: 1 gr.
Top/Bottom Pattern: Lines
Support: NO
Recommended filament: Fillamentum Crystal Iceland Blue.
2xJoint_Rim_Axle_Front / 1xAir_Intake_Body_A / 1xAir_Intake_Body_Front: Approx.Time: 13 min. Material: 2 gr.
Top/Bottom Pattern: Lines
Support: NO
Recommended filament: Fillamentum Traffic Black.
1xRear_Light: Approx.Time: 1 min. Material: 1 gr.
Top/Bottom Pattern: Concentric
Support: NO
Recommended filament: Fillamentum Ruby Red.
TOTAL 33 Pieces.