Mini Z Truck Body

If you print it please post pics! I enjoy people using my models.
***Updated design 12/01/2020
- Better Clearance for Drive Gear

***Updated design 05/14/2020
- Better Mounting for the cab

***Updated design 05/12/2020
- New Version, more detailed

***Updated design 05/10/2020
- Updated Rear Wheels for better mounting
- Window frame made thicker for sturdiness
- 86mm experimental model added. This version will have the most changes that will propagate to other models.

***Updated design 05/06/2020
- Unlimited and 94mm wheelbases added
- Better clearance for rear fairings over wheels

Sorry for the pics, need to reprint. The pictured body is a test fitment body.

Based on Freightliner Buggyra race truck from FIA European Truck Racing.

For all the folks that wanted a racing truck body but couldn't justify buying the expensive slot bodies...

Have tested thoroughly and no rubbing tires or impediment when running. The body is thick so impacts should be shrugged off... And also, rubbin’ is racing and with the wheels covered, have fun bashing into each other.

At approximately 1/32 scale. Should fit all Mini Z chassis with Wheelbase of 102mm [LM] and 98mm. Used wide setting for MR-03. Fits up to +3 mini-z wheels.

I make sure all my models do not have weird or hidden geometries and are manifold so should be no issues with printing.

I recommend using the included wheels if you can as they are a larger diameter than normal as 21.5mm and include ridges on both sides to help keep the tire on.

Lower offset wheels[+2mm] in front {with ring on back}, wider for rear [+2.5mm].

The clip is included in the files, and the instructions for the windows are in the post.

Will try to get a completed print pic as soon as I get the printer working again.

Print at .25mm and below.

Use thin plastic packaging to make windows. Paste on NewMiniZTruckWindows and cut outline. Front Window is 53mm x 22mm and should slide into the slot.