Resistance - M5A2 Folsom Carbine

Type: Assault riffle

Featured in: Resistance: Fall of Man, Resistance 2, Resistance 3 and Resistance: Burning Skies.

Commissioned by: Customer name withheld.

Designed in: Fusion 360

Overall dimensions: 872.9mm, 178.2mm, 121.1mm

Expected filament used: >940g

Print time: >55 hrs

Diffculty: Intermediate. I expect you are experienced with best 3D Printing practices and techniques.

Description:
This riffle was designed using two images from the games as reference. It was meant to mimic its game variant, but with my own design tweaks. It doesn't necessarily follow any specific version of the games mentioned above. My sources didn't indicate which of the 3 games is was from exactly. It has been optimized for 3D printing in mind, using minimal supports. It follows most of the game assets features, with the obvious tweaks.

Need:
(4) M4x10 screws
(8) M3x10 screws

• Designed to have parts glued together using pins. (Suggested adhesive - Clear Gorilla Glue)
• Pins are slightly undersized 0.3mm to compensate for adhesive
• Use support blockers and enforces to ensure only needed areas get support
• Using brims or rafts are not required; use as needed
• Parts were designed for my specific machines, If parts are too large for your build volume, there are plenty of free software and even slicers that can split the bodies for your needs.
• All files are manifold and oriented on the suggested print orientation.
• The sights are meant to attach to the Upper body using M3x10 screws.
• The Upper body side holes (2 per side) are meant to accept M4x10 for added details.(see images)

Files:
- Upper_Rear_Body (There's an FDM and SLA version. Text inscribed on part is too small for FDM )