HUAWEY SMARTPHONE CASE Y6 II. PORTABLE BATTERY CASE.

Cases for Huawei Y6 II smartphone (CAM L-21) and INNOOTech portable battery. It has been designed with impact resistance in mind. It is recommended to print in TPU, for its flexibility and resistance. The coupling piece between mobile and battery will be printed in PLA.

They have been designed with reinforcements at the apexes for better absorption of impact energy in the event of a fall.

The prototype has been printed in blue TPU of the Anycubic brand, offering very good results.

Huawei Y6 II (CAM L-21) and INNOOTech portable battery cases. It has been designed with impact resistance in mind fundamentally. Printing in TPU is recommended for its flexibility and strength. The casting will be printed in PLA.

They have been designed with reinforcements at the vertices for better absorption of impact energy in the event of a fall.

The prototype has been printed in blue TPU of the anycubic brand, offering very good results.

Sleeves printed in TPU (flexible material), printing time of approximately 6h 30 min and a material expense of about 50g. Because printing is to be done by deactivating the retractions, there may be some threads left, which will involve some extra post-processing work, but the result is very good.

TPU printed cases (flexible material), printing time of approximately 6h 30 min and a material expense of about 50g. Because it has to be printed disabling the retractions, some threads may remain, which will involve some extra post-processing work, but the result is very good.

TPU Print Parameters:

-layer_height = 0.2

-wall_thickness = 0.8

-retraction_enable = False

-solid_layer_thickness = 0.6

-fill_density = 25

-print_speed = 60

-print_temperature = 220

-print_bed_temperature = 40

-support = Everywhere

-platform_adhesion = None

-filament_diameter = 1.75

-filament_flow = 100.0

-nozzle_size = 0.4

-retraction_amount = 0

-layer0_width_factor = 100

-object_sink = 0.0

-overlap_dual = 0.15

-travel_speed = 90

-bottom_layer_speed = 40

-infill_speed = 0

-solidarea_speed = 15

-inset0_speed = 40

-insetx_speed = 60

-cool_min_layer_time = 5

-fan_enabled = False