Deck Box Magic Commander - Magic the Gathering (MTGA) - V.1

New version available

https://cults3d.com/fr/modèle-3d/jeu/deck-box-magic-commander-magic-the-gathering-mtga-v-2

Passionate about the card game Magic The Gathering and especially the format "Commander ", I made this Deck Box to protect my cards and my Commander, during our games. It also allows me to showcase my Commander and make it more visible to other players.

The front of the Deck Box offers a slot that can hold your Commander. Simply slide it in from above. It is very easy to remove from its slot when it comes into play.

The Deck Box can hold over 100 cards.

The dimensions of the Deck Box are particularly suitable for cards protected by sleeves (optional).

• Dimensions (L x W x H): 107 mm x 75 mm x 96 mm

• Wall width: 3 mm

Updates / Corrections

• 23-12-2020: easel to support a second commander next to the Deck Box, to meet the "Partnership" rule.

Do you have a special request for this item? (question, customization etc.). Don't hesitate to contact me !

Copyright©Cobra3D

You are purchasing my creations for personal use and for non-commercial use. You are not allowed to use my creations for commercial purposes. In particular, you are not allowed to resell my 3D design files (STL) or your 3D prints.

Have a good print! ;-)

• Nozzle: 0.4 mm

• Layer height: 0.20 mm

• Filling density: 15%.

• Supports: yes, but only for the frame (see photo).

My tips:

• I put 4mm at the spacing of the support pattern, so that the frame supports don't extend over the frame, but only over its bottom edge.

• I used the "Octagram Spiral" fill pattern as the bottom fill pattern, which I think is very cool!