CL4P SL1 (Prusa Mate)

Continuing with the Prusa mate series, I was Inspired by Mikolas Zuza's talking ClapTrap remix of Chaoscoretech's ClapTrap design.

This design isn't a remix.

Introducing the CL4P SL1. A unique combination of Borderlands ClapTrap and the Prusa SL1.

A fan of borderlands and of Prusa Printers? A fan of the Prusa Mate designs? Want something that's both adorable and a fun print?

Then this design is for you. :-)

There have been a couple of minor design changes. On the front plaques I adjusted the word 'original' and also some decals so they won't be too small to be unreadable in slicing software.
Do not use 'detect thin walls' in your slicing software as it had difficulty reading the decals this way. As I have prepared the files is fine. This also means you cannot scale down. if you do, you will lose the decals.

You will need need 1.75mm filament to attach the lid to the frame.

Please refer to the detailed images for assembly.

Happy printing. :-)

04/08/2020 Update - I have added a rod for the hinges for those who want to scale up by 150%. 2.85mm filament should do it as well. But you'll need a bit of elbow grease to the filament to pass through the hinges.

Supports will be required for some of the parts.

You'll also need 1.75mm filament to attach the lid to the frame.

There have been a couple of minor design changes. On the front plaques I adjusted the word 'original' and also some decals so they won't be too small to be unreadable in slicing software.
Do not use 'detect thin walls' in your slicing software as it had difficulty reading the decals this way. As I have prepared the files is fine. This also means you cannot scale down. if you do, you will lose the decals.