Grim Maus Heavy Tank

By far the largest tank from Grim Prints, the Grim Maus Heavy Battle Tank includes rotating turret and weapon options which are prepped for magnetizing include Twin Battle Cannons, Twin Anti-tank Cannons, Twin Heavy Spinner Cannons and Super Heavy Plasma Cannon. The sponsons are prepped to be magnetized from the inside so you can choose to use them or not and the magnets are not visible from the outside. You can mount the sponsons in one of three locations on the sides of the tank. **It is not recommended that both sponson mounting AND sponson weapons are magnetized as it will result in some interference of polarities. However, it is still quite possible to print it with all weapon options able to be swapped out easily. It is the perfect size to represent a heavy tank for heroic 28mm wargaming. Turret and hull hatches are loose so you can add your own operators.

Mirror the left side parts to get the right side. Minimal supports are required.

Visit Gumroad.com/GrimPrints for assembly video.

Follow Grim Prints on Facebook & Instagram.

DIMENSIONS:

Front to back including fenders/treads(but not main cannons) is 187mm.

Width including sponsons is 126mm. Not including sponsons is 108mm.

Height including turret is 77mm, not including turret 96mm.

By purchasing this product you agree to abide by the following terms and conditions

These files are for personal use only. You may not Sell, share, or distribute the files, prints, or their derivatives under any circumstance.

You may modify or resize the models or files for personal use only. You may not sell or distribute modified models or any models and files containing portions of Grim Prints models.

PLA print settings for all my designs: I print with a Prusa Mk3i. 0.4mm nozzle, 5% infill, 3 layer wall thickness, 4 layers bottom, 5 layers top. 100% speed. I use variable layer height between .2mm and .08mm. There's a feature in Prusaslicer that auto-generates the ideal layer thickness between your highest and lowest settings, it is amazing.