Demogorgon + Base - Stranger Things

Demogorgon figure from Stranger Things.

This sculpture is made to be the most similar, the closest to the Demogorgon of the series, be it the head, the mouth, the body, the feet, the position, the proportions.

I bought and downloaded several models of the demogorgon that can be found on the internet, but there was always something wrong "on a stand or in a position that prevented me from having for example the character alone or having another stand etc...".

So I decided to make it in order to be as close as possible, to be able to change the base to my correspondence "as here modelling of the base as the sideshow one" and especially to have an ease of realization, of printing, there are not 36 pieces to print and there is no technical complexity of printing.

If you're a fan of the series and want to make the Demogorgon of Stranger Things Season 1 in 3D, then you're in luck!

120 mm Demogorgon "can be increased in size"

Base: 62x47x17 mm "hollow, which reduces the material for SLA printing and does not interfere with FDM printing".

5 STL: Demogorgon, Demogorgon + Stud, Base, Base + Stud Drilling and Full Character with 1-piece base.

FDM printing: 20% fill, Substrate, print at 40mm/s

SLA printing: Chitubox Default setting, printing upside down at 30°.

If printing Character and separate base, "example SLA, glue the character centered on the base with resin or classic glue "type Loctite".

EDIT : Addition of the model with pitch and drilled base in order to be able to fix the model directly on the support after printing is required to glue it.