Bandit (Risk Of Rain 2)
Bandit (Risk Of Rain 2)
3D
Published 2020-02-06T16:21:51+00:00
Spent hours trying to get this printable. But here it is! The model is pre-cut into its parts for FDM printing. Im including the model with the cuts as well. This should be ready to print (i'm currently printing, if I dont come back and edit there shouldn't be any problems).
Scale to 10000% in CURA
You WILL need to use supports still. Definitely try and mess around with custom supports if you want to save your time and plastic. ( I used CURA's custom supports plugin)
*I use JB WELD Plastic Bonder epoxy to join the separate pieces. Then sand down the edges and paint with acrylic.
*Link to the Ready to Print Characters I'm Done with:
https://www.thingiverse.com/ShoeMan/designs
Anyway, I'll update the pictures once mine's done printing. If you print one, I want to see it! So I can fix any problems. ENJOY
Scale to 10000 in Cura
Use custom Supports
| Date published | 06/02/2020 |
| Material Quantity | 233 grams |
| Dimensions | 78mm x 128mm x 225 |