Apocalypse Token Organizers

WARNING I will no longer be updating existing models or uploading new ones to Cults3D. Please see my profile on Printables.com: https://www.printables.com/social/67221-jepod/models

These are to hold the cardboard tokens one gets from the Warhammer 40,000: Apocalypse game box from Games Workshop.

I toyed with the idea of making one big organizer but realized that each token type is used at different times in the game so it would be easier to have them all separate.

The names of the organizers are self-explanatory. You have one for the Action, Blast (holds both large and small), Command, and Wound tokens. I have not created one for the Objective tokens as they stay in place on the table top for the duration of the game so there isn't much of a need for an organizer for them.

5/21/20 Update: Increased the diameter of all magnet holes 0.05-0.1 mm. I've had a couple reports that the holes are a little tight so this should fix it. Also added tops with text on them. I've not printed these but had someone request it.

The logos found on some of the tops of these are the official Apocalypse logo from Games Workshop (I would imagine they own the rights to the logo and the name Apocalypse)

All the bottom parts are easily printed using any printers' default standard settings. I used a .4mm nozzle, 0.15mm layer height, and 20% infill with no problem.

You will get better detail in the top parts' logos if you use a 0.25mm nozzle but otherwise they too can be printed using your standard settings. I used a .25mm nozzle, 0.15mm layer height and 20% infill with no problem. You will want to print the tops upside down.

You shouldn't need any supports for anything, including the tops' logos. Again, print the top pieces upside down otherwise you'll need a TON of supports. The logo works fine without supports.