Designed by
elingsanto
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This is my contribution to the 3D printing community. There is a detailed BOM in the PDF file.
The printer uses general 2020 aluminum extrusions. This printer uses M3 SCREWS and M3 INSERTS. Please consider this when building the printer.
Most components were bought from Banggood. The links in the PDF are Affiliate links, use them as you like.
Feel free to send me a message if there are any doubts about the build. Building this printer is your responsibility, the assembly must be done with caution and all safety practices.
Approximate cost for a 250X250X270 build volume ~350 USD
Enjoy and happy printing! https://youtu.be/z3EQxy8eq90
Design Files
File Size
Z_axis_Motor_Mount.stl
50.5 KB
Z_axis_8mm_Holder.stl
45.6 KB
Cassini_3D_Printer_Parts.pdf
123 KB
Transition_Mirrored.stl
206 KB
Bed_Spring_Support.stl
55.6 KB
E3D_V6_P1.stl
63.6 KB
Extruder_2_Motor_holder.stl
30.7 KB
Extruder_Base.stl
171 KB
Extruder_motor_mount.stl
175 KB
Extruder_Planck.stl
256 KB
Lm8uu_Bed_holder.stl
72.8 KB
Motor_Mount.stl
182 KB
Full_Graphics_SC_Holder.stl
199 KB
PSU_Holder.stl
24.3 KB
Lm8uu_Bed_holder_Mirrored.stl
72.8 KB
Spool_Holder.stl
300 KB
Y_Carriage.stl
224 KB
Thread_Bearing_Holder.stl
43.2 KB
Transition.stl
207 KB
X_Carriage.stl
202 KB
Y_axis_Microswitch_P2.stl
31.2 KB
Arduino_Ramps_Case.stl
413 KB
E3D_V6_P2.stl
60.8 KB
Extruder_Cover.stl
78.4 KB
Extruder_Top.stl
342 KB
Fan_Duct_Cassini.stl
30.7 KB
Motor_Mount_Mirrored.stl
181 KB
ON_Off_Switch_Cover.stl
55.9 KB
Y_axis_Microswitch_P1.stl
60.9 KB
Comments