1:200 Dassault Mirage 5F/IIIR

Two successful variants of Dassault's Deltas were the attack variant Mirage 5 and the recce variant Mirage IIIR.
The Mirage 5 born from a Heyl Ha'Avir request for a simplified fighter bomber optimized for good weather theaters and able to carry more ordnance than the Mirage III CJ variant (Shahak for Israel).
About the Mirage IIIR, with so many Mirage that were flying for the AdA and all over the world, the reconnaissance variant was a good choice sharing common spare parts , common structures and common maintenance training with the fighter variants; in addition, the reconnaissance variant retains most of the operational capabilities of a fighter bomber.

New models optimized for 0.2mm extruders with better resolution and details.
Old models at lower resolution can be found in the old.zip file.

Models: Mirage 5F provided empty, with Sidewinders, + fuel tanks and the Mirage IIIR empty and with fuel tanks.
The Mirage 5F can also be used to represent the IAI Nesher/Dagger.

Models scale 1:200 made to be printed with a FDM with 0.2 nozzle at this scale.

For other scales use the following values into your slicer:
for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

At 1:100 it can be used a FDM printer with a 0.4mm nozzle.
Under 1:200 is almost mandatory a resin printer.

Print test 1:200 mades with a MSLA at 50micron resolution.

This creation is reserved exclusively for private and personal use; redistribution of these files, as they are or modified, is not permitted. For further details read the "Copyright" section in the FAQ section of Cults site by clicking on the (C) symbol below.

ciao

Enrico