Smartphone/multiple watch charging cradle

Here is a charging cradle that can hold several devices such as smartphones, connected watches/wristwatches, powerbank...

Tired of seeing every day the family's charging devices scattered all over the house, I decided to model this stand that blends in with the decor and whose cables are mostly hidden.

A circular location allows you to place the object of your choice such as a mini flowerpot or a camera for example.

There are six cable runs available. In order to avoid visual pollution, a cable passage is provided underneath the support, allowing them to be easily assembled to hide them behind a piece of furniture. In this cabinet, I have installed a power strip with three power sockets + three USB sockets to meet the need for this charging cradle.

Here is a charging stand that can contain several devices such as smartphones, connected watches / bracelets, powerbank ...

Tired of seeing the family's recharging devices scattered all over the house every day, I decided to model this support which blends into the decor and whose cables are mostly hidden.

A circular location allows you to place the object of your choice such as a mini flower pot or a camera for example.

There are six cable runs available. To avoid visual pollution, a cable passage is provided below the support, allowing them to be easily assembled to hide them behind a piece of furniture. Cabinet in which I installed a power strip with three mains sockets + three USB sockets allowing me to meet the need for this charging support.

Object size: 240 x 98 x 80 mm

Circular base diameter: 45 mm

Dimension of load cable passage: 19 x 11 mm

Printing time: 15 to 16 hours with a Prusa I3MK2S

Layer height: 0.3 mm

Filling density: 20 %.

Printing without support. Thinner printing is possible, but printing time is increased proportionally.