Deck Box Magic EDH / Commander - Magic The Gathering (MTG) - V.2

Passionate about the Magic The Gathering card game and especially the EDH / Commander and Oathbreaker formats, I made this Deck Box to protect my cards and my Commander during our games. , especially against drinks. It also allows me to highlight my Commander and make him more visible to other players.

The front of the Deck Box offers a slot that can hold your Commander. Simply slide it in from above. It is very easy to remove from its slot when it comes into play.

Several lid designs are available, including one that incorporates a second slot to accommodate your commander's partner or your Planeswalker's signature spell in Oathbreaker format.

This Deck Box is a real game holder: present your Commander, protect your library cards from liquids, enjoy a convenient dice drawer. The lid once turned upside down can serve as your graveyard and exile area.

New extension:

I'm pleased to offer you the first expansion to my EDH Commander Deck Box: a hit point counter for Magic Commander, which fits perfectly into the Deck Box lid.

URL: https://cults3d.com/:1102449

COBRA3D

Magic EDH / Commander / Oathbreaker Hit Point Counter - Magic the Gathering (MTG)

• 7.2k views
• 24 likes
• 22 downloads
• 1 collection
• 0 comments
• 0 makes

Download US$5.24

New features of the Deck Box:

This new version incorporates three new features:

• A dice drawer, on rails.
• A transport lid.
• A transport lid with a second slot incorporated to accommodate your commander's partner or your signature sort of Planeswalker in the Oathbreaker format.

The Deck Box can hold more than 100 cards with sleeves.

The dimensions of the Deck Box are particularly suitable for cards protected by sleeves (optional).

Dimensions (L x W x H): 107 mm x 75 mm x 96 mm

Wall width: 3 mm

The Deck Box in video:

URL: https://www.youtube.com/watch?v=ZZZlu5uVMTE

Updates/Corrections:

• 19-03-2023: new design for the Deck Box lid, which incorporates a second slot to accommodate your commander's partner or your Planeswalker's signature spell in the Oathbreaker format.
• 07-03-2023: an optional life point counter.
• 25-06-2022 : a video of the Deck Box, to see how it works.
• 27-11-2021 : new design for the Deck Box lid with a "stone wall" pattern.
• 22-08-2021 : new design for Deck Box with "stone wall" pattern, new design for bottom with "tile" pattern, new design for drawer, new bottom fixing, without glue.
• 18-12-2020: minor modification on the drawer, to make it "less slippery".
• 22-12-2020: new lids (3 new designs, improved lid fit on the Deck Box).
• 23-12-2020: easel to support a second commander next to the Deck Box, to meet the "Partnership" rule.

The first version of the Deck Box is still available here:
https://cults3d.com/en/3d-model/game/bibliotheque-3d-magic-commander-magic-the-gathering-mtga

Do you have a special request for this item? (question, customization etc.). Do not hesitate to contact me.

Copyright©Cobra3D

You are purchasing my creations for personal use and for non-commercial use. You are not allowed to use my creations for commercial purposes. In particular, you are not allowed to resell my 3D design files (STL) or your 3D prints.

Have a nice print ;-)

• Nozzle: 0.4 mm
• Layer height: 0.20 mm
• Filling density: 25%
• Supports: yes, but only for the Deck Box frame (see photo)
• FDM printing only, no SLA

My tip for the cover:

First I recommend you to print the lid with a layer height of 0.25 mm. The dimensions of the lid are very tight. The first time you are going to use it, it will be hard to push on the Deck Box all the way and very hard to remove, this is normal :). Heat your bed to 65° celcus (149°F) and let each side of the Deck Box with its lid rest on the bed for 2 minutes. Then remove and reheat the lid a dozen times (it will be much easier when hot), then let it cool. Your lid will be "thermoformed" and fit perfectly, it's magic :b.

My tip for the holders:

I put 4mm at the spacing of the support pattern, so that the frame supports don't extend over the frame, but only over its bottom edge.