Rubik's cube flowerpot mold

Make the replicas you want of this flower pot model, this mold has been designed and improved to be manufactured with 3D printing, it was designed with the idea to standardize the models of this size so you can use complex parts between several models of the same size as the core, fasteners and base of the mold so you only need to print the side parts of each design.

The mold is composed of 7 different parts: 4 side pieces that give the shape to the planter , the core which can be used in any design of the same size, the fasteners which are used to facilitate the assembly of the mold, the mold base which is used to center the core and help keep the whole mold centered these last two pieces you can also use them in any design of the same size, to identify the pot model we have used an alphabetical nomenclature this and subsequent designs are identified with a letter of the alphabet for this design is the letter "B", so all designs that carry an identification with letters are pots of 12 cm x 12 cm x 12 cm and can share pieces.

Video of use:

https://www.youtube.com/watch?v=T9kh_7XaZu0

This and all the designs of "SAENZROMERO_EUREKA3DED", Not for commercial use, if you wish to manufacture the designs for commercial use, please contact us to define the terms and conditions. All rights reserved by Eureka 3D Engineering Design.

Pot:

Height: 12 cm

Width: 12 cm

Depth: 12 cm

Thickness of mold parts: 4 mm

Recommended profile in Ender 3 pro:

Quality: 0.2 mm

Perimeter:

Wall thickness: 1.6 mm

Top/bottom thickness: 1.2 mm

Filling: 15%

Speed: 40 mm/s