Wifi QR flash code

Hello,

To continue on the optimization of life, I created this design to make it much easier for my family and our guests to connect to my wifi network.

It is often painful to have to provide information such as the name of the network or the wifi security key to your guests. And very often, an error slips into the entry or enumeration, forcing you to start all over again.

With this wifi connection support, you just need to flash the QR code with a phone and the connection will be done automatically and without possible error in a few seconds. Another big advantage is that you don't need to give your wifi password orally or textually, as it is encrypted by the QR code.

Printing requires two STL files (media+QR code plate) allowing the QR code to be interchanged if the network or even the print colors are changed. The wifi QR code plate requires a change of filament during printing to make a color gradient making it readable. It's a pretty simple step that I include myself in the file, you just have to change the filament during printing when asked. Make sure your printer is capable of doing this before you buy.

Once the purchase is made, you contact me by Cults email or by email at adrien.heurtin.ah@gmail.com in order to provide the name of your network and the wifi password (that I obviously keep confidential) so that I can model your personal wifi QR code and provide you with the model to print.

Hello,

To continue on optimizing life, I created this design to greatly facilitate the connection to my wifi network for my family and our guests.

It is often tedious to have to provide information such as the name of the network or the wifi security key to its guests. And very often, an error slips into the entry or the enumeration obliging to start again.

With this wifi connection support, just flash the QR code with a phone for the connection to be made automatically and without possible error in a few seconds. Another big advantage is that you don't need to give your wifi password verbally or verbally, as it is encrypted by the QR code.

Printing requires two STL files (support + QR code plate) allowing the QR code to be interchanged if the network changes or even the printing colors. The WiFi QR code plate requires a change of filament during printing to make a color gradient making it readable. This is a fairly simple step that I include in the file myself, you just have to change the filament during printing when prompted. Make sure your printer is capable of this before making any purchase.

Once the purchase is made, we contact each other by Cults messaging or by email address at adrien.heurtin.ah@gmail.com in order to provide the name of your network and the wifi password (which I obviously keep confidential) for that I can model your personal wifi QR code and provide you with the model to print

Object size: 87 x 74 x 35 mm

Printing time: 3 hours with a Prusa I3MK2S

Layer height: 0.2 mm (must be observed)

Filling density: 20 %.

Unsupported printing

Filament change required during printing when requested (layer N°11). Printer compatibility to be checked