Neighborhood workshop diorama 1-64 (Neighborhood workshop diorama 1:64)

***Description in English

Scene of a small neighborhood workshop for cars in 1:64 scale ready to be assembled by pieces ,everything comes separately for better printing ,assembly and choice of color when printing.

See your most precious parts in this wonderful workshop while they are being serviced!

The download consists of 16 files in STL format organized in a RAR file, revised and ready to print.

You will need additional materials such as a sheet of acetate or clear plastic to simulate glass (fits between the two window frames) Sandpaper to simulate asphalt ,artificial plants to create garden vegetation) and glue.

The floor template is added to cut the sandpaper to size as well.

Everything can be printed on a surface of 200 x 200, except the complete floor which will need a surface of at least 240 x 240 ,however ,you can print the floor separately and glue it as you wish with the files "Floor A ,Floor B ,Floor C and Floor D".

This last option also allows you to create only the workshop ,workshop with parking lots ,workshop with ramp or surface only with garden for a better customization :)

The following files should be printed in the following quantities:

Barrier x 3

Poster_support x 4

If you have any questions or suggestions please do not hesitate to contact me.

Enjoy! :D

Description en español

Scene of a small neighborhood workshop for cars at 1:64 scale prepared to be assembled by parts, everything is separated for a better impression, assembly and choice of color when printing.

See your most precious pieces in this wonderful workshop while they do their maintenance!

The download consists of 16 files in STL format organized in a revised RAR file and ready to print.

You will need additional materials such as a sheet of acetate or clear plastic to simulate glass (fits between the two window frames) Sandpaper to simulate asphalt, artificial plants to create garden greenery) and glue.

The floor template is added to cut the sandpaper to size as well.

Everything can be printed on a 200 x 200 surface, except for the complete floor that will need a surface of 240 x 240 as a minimum, however, you can print the floor separately and paste it as you like with the files "Floor A, Floor B, Floor C and Floor D".

This last option also allows you to create only the workshop, workshop with parking, workshop with ramp or surface only with garden for better customization :)

The following files should be printed in the following quantities:

Barrier x 3

poster stand x 4

If you have any questions or suggestions, do not hesitate to contact me.

Enjoy it! : D

English

It is advisable to print the small parts such as barriers,wheeled furniture,table and poster holders with 0.2 nozzle,handling low speeds such as 5-10 mm/s and layer height of 0.04,however you can try different parameters,the ones I indicate gave satisfactory results.

For the rest of the parts you can print with 0.4 nozzle without problems.

English

It is advisable to print small parts such as barriers, wheeled furniture, table and poster supports with 0.2 nozzle, handling low speeds such as 5-10 mm / s and layer height of 0.04, however you can test different parameters, which I indicated gave satisfactory results.

For the rest of the pieces, it can be printed with a 0.4 nozzle without problems.