Chest and the Silver Key
Chest and the Silver Key
Published 2020-05-29T12:33:32+00:00
Summary
Suck at woodwork? Just hit print and you can still have a treasure chest of your (or your kids) dreams!
https://www.youtube.com/watch?v=3CU1QwS6hi0
This is a fully 3D printable locking treasure chest, assembly instructions below
Glue the Lock_Shackle to the Lid
Glue the Lid Stoppers to the Chest and Lid (4x)
Insert the Lock_Disc on the Lock_Body
Glue the Lock_body and Lock_Cover
Glue the Lock to the Chest
Combine the Lower_Hinge and Upper_Hinge and insert the Hinge_Bolt (3x)
Glue the Hinge_Bolt_Cap to the Hinge_Bolt (3x)
Glue the Hinges to the Chest, start from the middle and make sure the Shackle fits to the lock.
The parts are oriented and only the Lid needs supports. The example print was done with 100% infill, which makes the chest nice and robust, but the print time was over 2 days.
Date published | 29/05/2020 |