JWizard’s Pine tree (Christmas) Lighted Display Cylinder

JWizard’s Pine tree (Christmas) Lighted Display Cylinder
11/19/2020
Designed by JWizard

(Use only 3-6 volt battery sources for lighting. DO NOT USE ELECTRIC LIGHTING. USING ELECTRIC LIGHTING IS A FIRE HAZARD).

Thank you for choosing the JWizard’s Pine tree Lighted Display Cylinder!

Our pine tree cylinder is not used for storage but to emit battery operated puck lighting out of the pine tree cutouts. The JWizard Pine tree Cylinder has been created using JWizard’s custom emojis. Our light cylinder comes in your choice of flat or beveled tops with or without a pine tree emoji cutout through the lid. The pine tree cylinder has decorative pine tree emoji pattern that continues all around the perimeter of the cylinder.

The following Files are included:

Pinetree Cylinder – bottom.stl
Pinetree Cylinder Top with emoji – flat.stl
netree Cylinder Top with Emoji – Round.stl
Pinetree Cylinder Top No Emoji – flat
Pinetree Cylinder Top No Emoji - Round

Materials used to create model in photos:

eSun Fire Engine Red PLA
1 Kitosun Submersible Floralyte V circular light with remote. Light was placed on the floor behind the door facing with light pointing upward.
Ornaments from the dollar store to surround cylinder

Idea’s:

It is not suggested to change the size of the pine tree cylinder. If you change the proportionality of the x,y and z axis, the top of the cylinder may not screw in properly.

You can purchase battery puck light that change color every few seconds. You can have a single color light. Experiment with the light puck facing up and down so that you don’t get too much light going through the cutouts. We like the way the pine tree cylinder looks when the puck is facing upward. Do not use any electric lighting with the display cylinder. (Use only 3-6 volt battery sources for lighting. DO NOT USE ELECTRIC LIGHTING. USING ELECTRIC LIGHTING IS A FIRE HAZARD).

If you increase the infill that will help to block bright light from escaping through the cylinder. If you use a dark color PLA that will also help to block light from shining through the cylinder. You can also paint the inside of the cylinder black to block light emissions.

We liked using the green light at maximum power. This create a decorative display. You can vary the light color, intensity to get the perfect settings for your display.

By adding your light source at the bottom of the cylinder, that will project the pine tree light toward the ceiling. If you adjust the position of your light source, you can control where the pine tree projection will display.

Conclusion:

JWizard’s Pine tree Lighted Display Cylinder is the culmination of months of work in creating custom emojis and twistable tops for use in this project. We hope you find JWizard’s Pine tree Lighted Display Cylinder to be decorative for the holiday season!

Let us know how you like JWizard’s Pine tree Lighted Display Cylinder. Please post your makes and share your comments!

Follow us so that you will be notified when we release our next project.

Thank you for your support,
JWizard

Requirements:

15% infill or more
A Dark color PLA that suits your tastes
Base Supports only for beveled top
No supports for flat top or cylinder

Slicing Instructions
:
1. Import the .STL into your slicing program.

Printing Instructions:

Print each part of the cylinders separately.