Tank Guns (for Panzer Buggy)

Alternatives for the front section of the Panzer Buggy (link to Panzer Buggy below).

Please note that this model ONLY includes a set of addons for the Panzer Buggy. The tank itself is sold separately. See pictures for further information. The print file contains numerous separate pieces (as you can see in the images with pieces laid out in a square pattern). The images with the armored vehicle depicts how the various pieces (highlighted in red) look when used in conjunction with the Panzer Buggy (which, again, is NOT included in this model).

This purchase includes the following:

1 Long Gun
1 Machine Gun
1 Plasma Cannon
1 Flame Cannon
2 Gauss Cannon
1 Extra Armor Plate
1 Worn Extra Armor Plate
1 Medium Cannon
Intended for use with the Panzer Buggy kit, but can be used for most 28mm scale tanks with some conversion work.

Intended for 3d print in 28mm scale.

Panzer Buggy kit can be found here:

https://cults3d.com/en/3d-model/game/armored-vehicle-panzer-buggy

If you have any questions, feel free to contact me by clicking on the letter symbol next to my designer profile.

Model is prescaled to 28mm. Model may have to be cut into individual parts in your slicing software in order to fit inside the printer area.
0.08mm layer height, 15% infill recommended (but not obligatory). Printing time varies depending on printer settings, hardware, and number of model parts being printed. One individual 28mm head takes approximately 15 minutes to print using the recommended settings.