Decorations for Headphones : Skull Headphones for Headphones with Flat Head

Hi, friends, in this model l designed a skull for headphones, this decor is for headphones with flat head, if you want to use other headphones I recommend that you use epoxy clay for add and mold. l used Gorilla glue type gel for add a my headphones, also if you headphones is more big you can escalete the model or sand the skull and add glue. Thank You...

English

Hi friends, in this model I designed a headphone skull, this decoration is for flat headphones, if you want to use other headphones I recommend you use epoxy plasticine to add and mold. I used Gorilla gel glue to stick my headphones, also if your headphones are bigger you can scale the model or sand the skull and add glue. Thank you...

Parameters used in Resin printer

Layer height: 0.05mm

Botton layer Count: 6

Expusere time: 10s

Bottom expusure time: 90s

Light-off Delay: 1s

Bottom Lift Distance: 2mm

Lifting Distance: 2mm

Bottom Lift Speed: 48 mm/min

Lifting speed. 150 mm/min

Infill Structure: none

Hollow: Wall thickness: 0.60 mm Accuracy: 0% Inner(x)

-It is recommended to use a resin printer so that all the ring details are obtained-

Faces: 345,112

Time of print in resin: 3 Hrs

Rotate the model 42° so that the resin does not spill and the piece comes out evenly

English

Parameters used in the resin printer

Layer height: 0.05 mm

Counting of lower layers: 6

Expose time: 10 s

Lower exposure time: 90 s

Shutdown delay: 1 s

Lower lifting distance: 2 mm

Lifting distance: 2 mm

Lower lifting speed: 48 mm / min

Lifting speed. 150 mm / min

Filling structure: none

Hollow: Wall thickness: 0.60 mm Accuracy: 0% Inside (x)

• It is recommended to use a resin printer to get all the details of the ring -

Phases: 346,111

Resin printing time: 3 Hrs.

Turn the model 42 ° so that the resin does not spill and the piece comes out evenly