3D model description
** UPDATE** 5/22/21
For some reason the Glide model was not uploaded, I have corrected this issue and hopefully there will be no other issues with the parts for download.
PLEASE! Contact/Message me and I will send you the model asap.
Sorry for the error!
Hi everyone!,
I modeled this assembly from pictures found all over the net, I had no real dimensions so this model is as close as I could get to the real thing.
It's around 1/10 scale if I'm correct, but honestly if someone has a better idea as to the true scale I'm open to correcting that issue.
I really like the design and would love to get the real specs when they are available just to see how close I got to the real thing.
NOTE* I also have never sold a model that I have designed so if you have any issues please have some patience,
I'll get any issues resolved as soon as possible :)
The AGM-183A Air-launched Rapid Response Weapon (ARRW) is a long-range hypersonic missile designed by Lockheed Martin for the US Air Force (USAF).
The AGM-183A has a maximum speed of 15,345 miles per hour (24,695 km/h).[15]
The weapon uses a boost-glide system, in which it is propelled to hypersonic speed by a rocket on which it is mounted before gliding towards a target.[5] According to Popular Mechanics, the U.S. Air Force was, as of April 2020, considering using the remaining fleet of B-1B bombers as AGM-183A firing platforms, with each aircraft carrying up to 31 of the weapons mounted internally and on external pylons
3D printing settings
Here's the printing specs I used to print all the parts.
You might have to adjust the specs to suit your needs but as for me these worked just fine.
I personally scaled the parts 30% and designed the model so the detail will still hold up at that reduction.
- Model Specs Dimensions -
Body 1/1 661.8571 X appx 123.6061
Nose Cone 1/1 250.5112 X appx 100.2451
- Reduced 30% -
Body -30% 198.5572 X appx 37.0818
Nose Cone -30% 75.1534 X appx 30.0735
-*Print Specs - Printed on an Ender3 .04 nozzle, eSun PLA PRO-Grey
-Body, Nose Cone, Nacelle, Nacelle Cover-, print specs *(my settings)
I made custom supports for the Nose Cone, Main Body, and Glide weapon,
I'll try to upload the G-Codes for each part to make it easier.
NOTE* All the .3mf G-Codes were created in Cura 4.8.0
- Main Body and Nose Cone -
Layer height 0.1
Infill 30% ZigZag
Horizontal Expansion 0 (for the body and Nose Cone)
Hole Horizontal Expansion 0
Support Custom only
Build Plate Adhesion Skirt
- Tail Fins -
Layer height 0.08
Horizontal Expansion .015
Hole Horizontal Expansion 0
Support None
Build Plate Adhesion Brim
- Glide Weapon -
Layer height 0.08
Horizontal Expansion 0
Hole Horizontal Expansion 0
Support Custom and Build Plate
Build Plate Adhesion Skirt
- Engine/Nacelle Nozzle -
Layer height 0.1
Horizontal Expansion 0
Hole Horizontal Expansion 0
Support None
Build Plate Adhesion Skirt
Again these are my settings, your mileage may vary.
Enjoy!