Organize electronic components P3Steel Box. SSR-25, OVM20 lite, 3 X Smoothers i fan 80.

P3steel:

HTA3D Extruder

I bought the components separately, but I assembled it as you can buy it from HTA3D, for the P3steel (Orballo v2) it's the best I've tried.

Hotend V6 All metal.

Nema 17 motor - length 40mm

Leveling sensor 3DTouch

Filament presence sensor

Dual toothed pulley (the best I've tried)

4020 layer fan

3010 hotend fan

Printed parts.

---

Spindles 8mm z-axis.

Smoother X axis, Y axis and Extruder

SSR-25

OVM20

CURA configurations:

Quick Prints.

Nozzle 0.4

Layer height: 0.32

Line width: 0.4

Wall thickness 1.28

Upper bottom thickness: 1.28

Filling 20-30

Filling pattern: Lines

Print speed: 60

Inner wall speed / Outer wall speed: 40

Traverse speed: 100

Acceleration control: OK

Print acceleration / fill / outer wall / : 3000

Displacement acceleration: 5000

Enable retract : OK

Retraction distance: 5

Retract speed: 25

If you want more quality:

CURA Settings:

Nozzle 0.4

Layer height: 0.24

Line width: 0.4

Wall thickness 1.2

Upper / lower thickness : 1.2

Filling 20 - 30

Filling pattern: Lines

Print speed: 40

Inner wall speed / Outer wall speed: 30

Traverse speed: 100

Acceleration control: OK

Print acceleration / fill / outer wall / : 1500

Displacement acceleration: 3000

Enable retract : OK

Retraction distance: 5

Retract speed: 40

I've created a box for the components I have on the back of the case that covers my P3steel to cool them better and keep them tidy.

Cheers!

-