Skip to content

Wright Flyer 1903, Power Plant

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 3.2k views
  • 2 likes
  • 1 collection
  • 1 make
License
3D design format
STL and ZIP Folder details Close
  • Air-Inlet-Cover01.stl
  • Assy Manual-RE06PP-R2.zip
  • C-Case-Earth-Foot01.stl
  • C-Case-Rib-Set01.stl
  • C-Case-Side-Cover01.stl
  • C-Case-Top-Cover01.stl
  • C-Case-Top-Cover02.stl
  • Cam-Advance01.stl
  • Cam-Advance02.stl
  • Cam-Advance03.stl
  • Cam-BRG-Cover-Set01.stl
  • Cam-IGN-Set101.stl
  • Cam-Rocker01.stl
  • Chain-Guide-LH-Set202.stl
  • Chain-Guide-LH205.stl
  • Chain-Guide-RH-Set101.stl
  • Chain-Guide-RH-Set102.stl
  • Chain-Guide101.stl
  • Chain-Rod-Stiffener01ws.stl
  • Chain-Tension-Brkt201.stl
  • Crank-BRG-Cover101.stl
  • Crank-BRG-Cover102.stl
  • Crankcase-Brg-Plt01.stl
  • Crankcase-Plug-Set01ws.stl
  • Crankcase03ws.stl
  • Crankcase102ws.stl
  • Crankcase200ws.stl
  • Cylinder101.stl
  • Cylinder102.stl
  • DC-Gene-Base101.stl
  • DC-Gene-Base102.stl
  • DC-Gene-Body01.stl
  • DC-Gene-Coil01.stl
  • DC-Gene-Knob01.stl
  • DC-Gene-Magnet01.stl
  • DC-Wheel01ws.stl
  • DC-Wheel02ws.stl
  • Eng-Lever-Plate-Set201.stl
  • Eng-Lever101.stl
  • Eng-Mount-Frt01.stl
  • Eng-Mount-Mid01.stl
  • Eng-Mount-Rr01.stl
  • Eng-String-Set01.stl
  • Flywheel01ws.stl
  • Flywheel02.stl
  • Foot-Rest01.stl
  • Fuel-Tank01ws.stl
  • Fuel-Tank02.stl
  • Fuel-Tube-Clamp-Set01.stl
  • Fuel-Tube01.stl
  • Fuel-Valve-Set01.stl
  • Fuel-Valve-Set102.stl
  • Gear10-Cam-Sft01.stl
  • Gear10-IGN-Sft01.stl
  • Handle-Frame-Fitting01.stl
  • Handle-Frame-Fitting02.stl
  • Hip-Cradle-Base01.stl
  • Hip-Cradle-Body01.stl
  • Hip-Cradle-Lever-Set01.stl
  • IGN-Bus-Bar01.stl
  • IGN-Plug-Set101.stl
  • IGN-SPG-Lever-Set201.stl
  • Intake-Manifold01.stl
  • Intake-Manihold02.stl
  • Meter-Base01.stl
  • Meter-Body01.stl
  • Meter-Body02.stl
  • Meter-Body03.stl
  • Meter-Lens-Set01.stl
  • Meter-Lever-Set01.stl
  • Meter-Rotor01ws.stl
  • Mount-Foot-Nut-Set01.stl
  • Mount-Foot-Set01.stl
  • Oil-Drain-Clamp01.stl
  • Oil-Drain-Tube01.stl
  • Oil-Pump101.stl
  • Oil-Tube-Clamp01.stl
  • Oil-Tube-Conn-Set01.stl
  • Oil-Tube-Set01.stl
  • Pitch-Cont-Brkt-Set01.stl
  • Pitch-Cont-Lever01.stl
  • Pitch-Cont-Wheel01.stl
  • Prop-Boss-Stop01.stl
  • Prop-Half-Cut201mws.stl
  • Prop-Half-Cut202mws.stl
  • Prop-Half-Cut203.stl
  • Prop-Half-Cut204.stl
  • Prop-Half-LH-Cut201mws.stl
  • Prop-Half-LH-Cut202mws.stl
  • Prop-Shaft-Bush-Set101.stl
  • Prop-Sprt-Boss-Half01.stl
  • Prop-Sprt-Boss-LH01ws.stl
  • Prop-Sprt-Boss-Lwr01ws.stl
  • Prop-Sprt-Boss-RH101ws.stl
  • Prop-Sprt-Boss-Rr01.stl
  • Prop-Sprt-Boss-Rr02.stl
  • Prop-Sprt-Boss-Top01.stl
  • Prop-Sprt-Boss-Top02.stl
  • Prop-Sprt-Boss02.stl
  • Prop-Sprt-Boss101ws.stl
  • Prop-Sprt-Rod02ws.stl
  • RPM-CTR-Lever01.stl
  • RPM-CTR-Stand101ws.stl
  • RPM-Counter01.stl
  • RPM-Counter02.stl
  • RPM-Counter03.stl
  • Radiator01.stl
  • Radiator02.stl
  • Radiator03ws.stl
  • Radiator04.stl
  • Rocker-Arm-Set101.stl
  • Rocker-Roller-Set01.stl
  • Shaft-Cover01.stl
  • Shaft-Cover02.stl
  • Skid-Conn-Bck-Set01ws.stl
  • Skid-Conn-Bck-Set02.stl
  • Skid-Conn-Rr-Set01.stl
  • Skid-Connect-Set01ws.stl
  • Skid-Connect02.stl
  • Skid-Sprt-Frt-Set01ws.stl
  • Skid-Sprt-Rr-Set01ws.stl
  • Skid-Stay-Sprt-Set01.stl
  • Skid-Stay-Sprt-Set02.stl
  • Sprocket-Rs15--11-201ws.stl
  • Sprocket-Rs15-22-201ws.stl
  • Sprocket-Rs25-28ws.stl
  • Sprocket-Rs2510-01ws.stl
  • Strut-End-Set101.stl
  • Strut-Support-Set201.stl
  • Strut-Support-Set202.stl
  • Tube-Clamp-Set101.stl
  • Turn-Tool-Knob01.stl
  • Turn-Tool-Sprkt01.stl
  • Turn-Tool-Stand01.stl
  • Turn-Tool-Stand02.stl
  • Turn-Tool-Stand03.stl
  • Turn-Tool-Stand04.stl
  • Valve-Body101mws.stl
  • Valve-Body102mws.stl
  • Valve-EX-Seat01ws.stl
  • Valve-IN-Seat01ws.stl
  • Valve-Set01.stl
  • Water-Hose-Eng-Set01.stl
  • Water-Hose-IN01.stl
  • Water-Hose-Out-Set01.stl
  • Water-IN-Tube01.stl
  • Water-Out-Tube-Set101.stl
  • Wing-Rib-Frt01.stl
  • Wing-Rib-Mid01.stl
  • Wing-Rib-Pilot-Frt01.stl
  • Wing-Rib-Pilot-Mid01.stl
  • Wing-Rib-Pilot-Rr01.stl
  • Wing-Rib-Rr01.stl
  • Wing-Rib-TE01.stl
  • Worm2-12-Gear201.stl
  • Worm2-12-Wheel01.stl

Learn more about the formats
Publication date 2021-03-06 at 05:27
Design number 323300
konchan77

konchan77

3D printer file info

3D model description

It is well known that the Wright brothers made their first powered flight on the "Wright Flyer" on December 17, 1903.
I made the Engine Model as β€œIn-Line, Water-Cooled Engine, 1903”in 2020.12.28.
This is the Power Plant Functional Model using with commercial parts including Engine, Propeller and Reduction Drive Chain and Systems (Fuel, Water, Electrical, Instruments and Control) to explain the progressiveness of the Wright brothers.
A. The features incorporated in the model are as follows;
γ€€β‘  Engine, 4 Cylinder, Water-Cooled
γ€€β‘‘ Propeller Reduction Drive Chain Mechanism
γ€€β‘’ Propeller Support Frame
γ€€β‘£ Propellers (2 blades Counter rotation)
γ€€β‘€ Lower Wing (Center Section Only) including (a)Engine and (b)Pilot Frames
γ€€β‘₯ Upper Wing (Center Section Only)
　⑦ Systems ((a)Fuel, (b)Water, (c)Electrical, (d)Instruments and (e)Control)
　⑧ Skid with Rotation Tool to turn Propeller by finger
　⑨ Handling Frames

[Video]
https://youtu.be/WwY6JaYGwxs

B. Assembly Manual (PDF format, total 60 pages)
The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".
Experience in cutting and connecting chains and wood model airplane making are preffered.

C. STL files
β€œws” of last 2 digits of file name means β€œWith Support” special designed.
Total STL files are 155 items including the stand and tools.

D. Purchase Parts Information;
- Roller Chains ・・ Tsubakimoto Chain RS15-1-RP-U, RS25-1-RP-U, RS25-1-MCJL
- Coil Springs ・・ Ο†0.3x3x5,Ο†0.3x5x5
- Aluminum Tubes ・・ Ο†3, 4, 5, 7, 8, 9, 10
- Copper Wire ・・ Ο†1
- Brass Rod ・・ Ο†2
- Wood Bar ・・ Rectangle (3x15, 3x20, 5x10, 5x15), Square (3x3, 8x8, 10x10)
γ€€γ€€γ€€γ€€γ€€γ€€γ€€ Round (Ο†8)
γ€€γ€€γ€€γ€€γ€€γ€€γ€€ Semicircular (Ο†12)
- Screws, Nuts, Washer ・・ M1.4, M2, M3, M4 ・・Adjust screw length by your experience.

- Screws to wood parts are determined by your experience.

E. Total Net Print Time: Approx. 238 HR
- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
Note: When at actual print, each parameter may be adjusted by your experience.

F. Printing settings
Raft, Support, Layer Height, Infill: Depending on your experience.
My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.

[IMPORTANT NOTICE]
This model is large, requires a lot of parts, contains a lot of handmade elements and takes time.
Please consider carefully before downloading.
FDM printer with the size (150 (W) x130 (L) x100 (H)) or larger must be required to make this model.
Model size=900(W) x 680(L) x 620(H: Wing), 730(H: with Prop), Weight: 2.6kg
[Update 2021.9.28]
Assy-Manual revised (P.35)
[Update 2021.10.12]
Assy-Manual revised (P.50)

I do hope your patience and success.

3D printing settings

See above.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.