1:1 M2HB, AN-M2, M3 Machine Gun Prop Collection

The collection of the Browning M2HB, AN-M2, M3, FN M3M and M3P all in one package. See my other designs for more information on the designs and accessories included.

A 1/2" copper plumbing pipe sizes to North American standards will be needed.

A resin printer would also be useful for printing small parts such as rivets.

This model contains a LOT of parts and is NOT a one-piece model. Its not one of those models you just print and glue together. Post processing will be necessary. You should have a FDM printer with a 12" bed. You may be able to subdivide the model for smaller printers using Meshmixer or other software but that is your responsibility. It may not be printable on 3d belt printers. If you have a question, "Message" me.

This is a highly accurate replica and extremely convincing if properly assembled and painted.

New PINTLE MOUNT included

Added Mounting Brackets for displaying prop.

If you need something to mount this on, consider my M3 Tripod.

This is a prop. NOT A FIREARM. It cannot be made into a real weapon. An airsoft or paintball conversion may be possible, however this was not initially designed for that purpose.

0.2mm layer height. 4 wall thicknesses and 20 percent infill minimum. I recommend that some parts like the charging handle would best be printed with 100 percent infill for extra strength. Ironing would greatly reduce the amount of sanding.
Some parts would benefit from being printed on a Resin printer, like the rivets.