Baby Yoda keyholder

Hello! Today I bring you a nice baby yoda key holder, with mechanism to move the lid of your crib when placing the keys, in the file comes a zip with some images to indicate how to assemble it correctly.

The original file is about 6 cm long but you can adjust it in your slicer to the size you want :)

The mechanism can be used with a rubber band without using the counter weight, or it can be used with a strong thread and the counter weight where you can place something inside it to adjust the tension of the cradle top.

Hello! Today I bring you a nice baby yoda key holder, with a mechanism to move the lid of her crib when placing the keys, in the file there is a zip with some images to indicate how to assemble it correctly.

The original file is approximately 6 cm long but you can adjust it in your slicer to the size you want :)

The mechanism can be used by means of a rubber band without using the counterweight, or it can be used with a resistant thread and the counterweight where they can place something inside it to adjust the tension of the sieve cover.

All the pieces were printed at 0.2mm layer width, 15% infill, 40mm/s speed, with supports, the baby yoda I recommend to do it in resin printer or at 0.1mm layer width.

I printed all the pieces at 0.2mm layer width, 15% infill, speed 40mm / s, with supports, baby yoda recommend doing it in a resin printer or fdm printer at 0.1mm layer width