Amiga 600 RGB2HDMI

Amiga 600 RGBtoHDMI integration without a hole on your favorite older computer.

A600 RGBtoHDMI model ==> https://github.com/c0pperdragon/Amiga-Digital-Video#small-adapter-variant

This part replace the RF module who must be unsoldering from the motherboard.

It's design to use a FPV connectors and ribbon, and a micro switch (6mmx6mmx13mm) to OSD access.

M2 screws used to maintain the base on the motherboard (use old RF holes) and for the back part to maintain the microswitch (no glue needed)

HDMI FPV female A4 20mmx16mm and male type C2 or C3 or A1 (for this last connector, a mini-HDMI to HDMI adapter needed) example here

=> https://fr.aliexpress.com/item/33057618512.html?spm=a2g0o.productlist.0.0.55d9110dP69cy1&algo_pvid=3d18a82a-76d5-4536-9013-b67207959ac7&algo_expid=3d18a82a-76d5-4536-9013-b67207959ac7-0&btsid=2100bde316142439925178207ec077&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

A less broad and rounded possible HDMI cable must be used to fit with the micro switch !

Amazon for mine => https://www.amazon.fr/gp/product/B081QL3FYC

3D PRINTING SETTINGS

CURA parameters

Layer height : 0.2

Infill: 10%.

Wall Thickness : 1.32mm

Wall Line Count : 3

Top and Bottom Thickness : 0.84mm

Top and Bottom Layer : 7,

First layer speed : 40mms

Support : yes and "everywhere" (supports needed for the Pi0 support)

Adhesion : as you want, i use BRIM option with "only outside" checked

CURA parameters

Layer height : 0.2

Infill: 10%.

Wall Thickness : 1.32mm

Wall Line Count : 3

Top and Bottom Thickness : 0.84mm

Top and Bottom Layer : 7,

First layer speed : 40mms

Support : yes and "everywhere" (supports needed for the Pi0 support)

Adhesion : as you want, i use BRIM option with "only outside" checked