Resident Ada and Dress1 by SPARX 3D print model
Ada Wong in her original short dress from Resident Evil franchise. There are a lot of pictures and models available and having contacted the sellers and the original concept artist, none of them can claim intellectual ownership of the “girder pose”, both model sellers do not know of the original artist or sculptor . . All three do not sell under Capcom licence . . so having been requested to create the model to accompany the Jill model . . here it is . . or that should that be here they are?? . . . This model has variants of Ada’s short dress/costume with three styles of upper torso, with two lower torso variants, creating two different poses.
A second model Dress2 is also available featuring her long split halter dress with the same variants from this website as a seperate full model.
There is an NSFW and Add-Ons body pack, not available here . . contact/message me for details.
The legs, torso and head parts are removable and interchangeable with magnets(see pics) The The parts are interchangeable with All “Resident Ada” model downloads . .so build your favourite model or two . .
The model is1/6 scale at H294, and 345mm height with base The base is designed to fit along side the Resident Jill model to create a two character diorama.
3 upper torso’s options (and torso pin) 2 lower torso options 1 Right Leg 1 head (and head pin) 2 sets of hands/weapons (a one part and 2 part rifle) 1 scarf tails if you want to use them . . 1 base (2 parts & FDM Only)
16 items in total.
PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.
Why cut into many smaller parts I have been asked?
- If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
- Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
3D PRINTING SETTINGS NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .
TIPS: Resin Printing; Hollow 2.40 Raft 100% Lower Torso’s/Legs, Heads, Upper Torso’s
Do not Hollow Raft 100% Rifle, Scarf Tails, Pose2 Left Arm
FDM ALL at 0.16 30% fill, speed 50
ALWAYS dry assemble and “trim” parts prior gluing. Pose1; paint rifle and upper Torso separate before fixing. Pose2; glue pistol left arm to torso, before painting. Right leg can be fixed before painting.
Similar Models
