Tarantulas Terminal and Stasis Web from Transformers Beast Wars 3D print model

From Tarantulas' zany science-y brain comes this evil contraption to trap and drain the life force out of the captured Cheetor!

The terminal is Tarantulas-sized so he can operate the buttons and such, cranking up the power to drain the life out of Cheetor! The terminal body itself is affixed on a triangular mount which itself is built on a platform with treads. Must be nifty for helping Tarantulas move the entire gizmo around easily!

Here's how it looks from another angle, the 5mm port on the front also allows for the Terminal to connected to the statis web part using rubber tubing too!

The web component itself comes in three parts and is mounted onto two Cyberbase base tiles using the pillars. Cheetor or another unfortunate victim can then be tied up onto the web using small bits of wire. Here also, we had printed the web in a translucent blue material to give it the energized look too!

=== ASSEMBLY ===

The attached diagram show how all the various parts of this build come together:

The CyberBase Base Plate is available in the earlier CBS Core Set ( https://www.patreon.com/posts/33140482 ).

===

Hope y'all like this terminal set and have fun 3d printing this and displaying Cheetor and Tarantulas in a somewhat unorthodox fashion! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog