Hammer of Ragnaros - World of Warcraft 3D print model

Sulfuras is the mighty weapon of Ragnaros the Firelord. The weapon never leaves his grasp. It is composed of flaming red elementium and etched from end to end with intricate runes that seem to move like flowing lava across the weapons surface.

The hammer is quite big and is meant to be post-processed. There is a hole for a 8 mm steel rod to be place in the hammer so it holds better together.

Files contain pieces of the hammer ready to be 3D printed and complete hammer files that are not cut into smaller pieces.

SCALE

At 100% scale the hammer’s dimensions are:

Width approx. 571 mm

Length approx. 800 mm

Height approx. 366 mm

PRINTER SETTINGS

As the hammer is quite big, it is meant to be post-processed. We recommend a layer height of 0.2 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the hammer parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.

If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This model was created by Jose @zbite_3dart from our 3Demon team. It is fan-made.

We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. Here are some links to our website and social media where you can see more of our creations:

https://3d-mon.com/links/